Download GETONA SC-1007

Technical description and instructions for exploitation.
Getona SC-1007
The general construction of the toolhead with the working instruments is presented on figure 4
Pen corps
Toolhead corps
Adjusting system of the cutting
instrument
Adjusting nut of
the creasing
instrument
Supporting plate of
the toolhead
Lighter
Pen
Cutting instrument
Creasing instrument
Figure 4 - General construction of the toolhead
3.3.2. External connectors.
The external connectors of the machine are presented on figure 5.
USB connector
Power supply
5A switch
connector
Figure 5 - The external connectors.
Vacuum connector
3.3.2.1. Description of the external connectors and the control devices.

Power supply connector –connects the machine to the electric grid.

5 A switch –prevents higher than the normal consumption from the elements of the
machine;

Main power supply switch –switches the machine on and off;

Adjusting of the vacuum ventilator –switches the ventilator for vacuum fastening of the
material on and off;

Emergency OFF button –immediately switches off the power supply of the machine when
emergency occurs.

MG Solutions Ltd.
A special connector USB – serves for turning the machine to the managing computer ;
Page 7 of 21