Download USER`S MANUAL ERRATA
Transcript
S3C84E5/C84E9/P84E9 I/O PORTS Port 4 Control Register, High Byte (P4CONH) F0H, Set1, Bank0, R/W, Reset value="00" MSB .7 .6 .5 .4 .3 .2 .1 .0 LSB [.7-.4] Not used (must keep always 0) [.3-.2] P4.5 Configuration Bits 0 0 = Input mode with pull-up 0 1 = Input mode 1 X = Push-pull output mode [.1-.0] P4.4 Configuration Bits 0 0 = Input mode with pull-up 0 1 = Input mode 1 X = Push-pull output mode Figure 9-11. Port 4 High-Byte Control Register (P4CONH) Port 4 Control Register, Low Byte (P4CONL) F1H, Set1, Bank0, R/W, Reset value="00" MSB .7 .6 .5 .4 .3 .2 .1 .0 LSB [.7-.6] P4.3/TBPWM Configuration Bits 0 0 = Input mode with pull-up 0 1 = Input mode 1 0 = Push-pull output mode 1 1 = Alternative function mode: TBPWM output [.5-.4] P4.2/INT10 Configuration Bits 0 0 = Input mode with pull-up; falling edge interrupt (INT10) 0 1 = Input mode; falling edge interrupt (INT10) 1 0 = Input mode; rising edge interrupt (INT10) 1 1 = Push-pull output mode [.3-.2] P4.1/INT9 Configuration Bits 0 0 = Input mode with pull-up; falling edge interrupt (INT9) 0 1 = Input mode; falling edge interrupt (INT9) 1 0 = Input mode; rising edge interrupt (INT9) 1 1 = Push-pull output mode [.1-.0] P4.0/INT8 Configuration Bits 0 0 = Input mode with pull-up; falling edge interrupt (INT8) 0 1 = Input mode; falling edge interrupt (INT8) 1 0 = Input mode; rising edge interrupt (INT8) 1 1 = Push-pull output mode Figure 9-12. Port 4 Low-Byte Control Register (P4CONL) 9-15