Download NETWORK VIEWER USER MANUAL

NETWORK VIEWER INSTALLATION
Select the grid size.
Use the left mouse button to draw motion detection
area and use the right mouse button to erase motion
detection area.
Use the buttons at the bottom of the screen to set or clear
motion detection all area of the screen.
1.7.4.3 Sensor Input
Select the circuit type for the sensor input.
1.7.4.4 Relay Output
a.
b.
c.
Channel 1 through 16: select the relay output for the
events.
Relay 1 through 3 output time: 1 to 30 seconds.
Relay 4 mode select: not used, HDD error, power,
user.
34