Download Xilinx Timing Constraints User Guide
Transcript
Chapter 3: Timing Constraint Principles An example of this method is shown in the following figure. Figure X-Ref Target - Figure 3-8. TNM=FFS:FLOPS FLOPS DI DO DI DO ADDRS WE MEM I 0 D O WE A0 A1 A2 A3 D Q EN DI DO ADDRS WE EN D Q FLOPS X11068 Figure 3-8: TNM Placed on Macro Pin Traces Downstream to Synchronous Elements When placing a TNM constraint on a pin, a qualifier can be used to narrow the list of elements in the time group. A qualified TNM is traced forward until it reaches the first synchronous element hat matches the qualifier type. The qualifier types are the predefined time groups. If that type of synchronous element matches the qualifier, the synchronous element is given that TNM attribute. Whether or not there is a match, the TNM is not traced through the synchronous element. For more information, see Predefined Time Groups. 38 www.xilinx.com TIming Constraints User Guide UG612 (v 13.2) July 6, 2011