Download Xilinx Timing Constraints User Guide

Transcript
Chapter 3: Timing Constraint Principles
An example of this method is shown in the following figure.
Figure X-Ref Target - Figure 3-8.
TNM=FFS:FLOPS
FLOPS
DI DO
DI DO
ADDRS
WE
MEM
I
0
D
O
WE
A0
A1
A2
A3
D Q
EN
DI DO
ADDRS
WE
EN
D Q
FLOPS
X11068
Figure 3-8:
TNM Placed on Macro Pin Traces Downstream to Synchronous
Elements
When placing a TNM constraint on a pin, a qualifier can be used to narrow the list of
elements in the time group. A qualified TNM is traced forward until it reaches the first
synchronous element hat matches the qualifier type. The qualifier types are the predefined
time groups. If that type of synchronous element matches the qualifier, the synchronous
element is given that TNM attribute. Whether or not there is a match, the TNM is not
traced through the synchronous element. For more information, see Predefined Time
Groups.
38
www.xilinx.com
TIming Constraints User Guide
UG612 (v 13.2) July 6, 2011