Download melsec - Suport

/MELSE
APPENDICES
(3)Data error
'
i
Return
Value
(HEX)
Error Contents
80
Byte/point number read error
The number of bytes (batch read) or the number of points
(random read) is outside the allowable range.
Set the number within the allowable
range.
Correct the X number or Y number.
82
X number or Y number error
The head X number designation for writing input X is not "0"
or "8".
The head Y number designation for reading output Y is not
"16".
X point or Y point number error
In the "input X writing" operation, the set number is not "8"
or "16" when the head number X designation is "0", or the
set number is not "8" when the head number X designation
is "8". In the "output Y reading" operation, the set number is
Correct the X number or Y point.
Countermeasures
~~
83
not "8".
__
~
~
84
Byte/point number write error
The number of bytes (batch write) or the number of points
(random write) is outside the allowable range.
Set the number within the allowable
range.
87
Remote designation error
A setting other than RUN/STOP/PAUSE is set.
Set RUN/STOP/PAUSE for remote
setting .
~~
88
Random write designation error
I
Set seffresetlwrite for random write.
A code other than set (0).reset (11, and write (2) is set.
89
Canceling processing
The next processing request was given before the current
processing was completed.
Give the next processing request
only after the current processing
has been completed.
8A
Switch number designation error
The set switch number is not "0" or "1" for the switch
reading operation.
Correct the
number.
designated
switch
I
APP8
IS (NAI 66253-A