1
Download RST Condition
Transcript
*CLS *CLS clears the Standard Event Status Register, the Operation Status Register, the Questionable Signal Register and the error queue. This clears the corresponding summary bits (3, 5, and 7) in the Status Byte Register. *CLS does not affect the enable masks of any of the Status Registers. Comments • Coupled command: No • Related Commands: STATus:PRESet • *RST Condition: none *ESE *ESE <unmask> enables one or more event bits of the Standard Event Status Register to be reported in bit 5 (the Standard Event Status Summary Bit) of the Status Byte Register. unmask is the sum of the decimal weights of the bits to be enabled. The query form returns the current enable mask. Parameters ParameterName ParameterType Range of Values Default Units unmask numeric 0 through 255 none A 1 in a bit position enables the corresponding event; a 0 disables it. Comments Example • Coupled command: No • Related Commands: *ESR?, *SRE, *STB? • *RST Condition: unaffected • Power-On Condition: no events are enabled Enable all error events *ESE 60 Enable error events *ESE? *ESE? queries the current setting of the Event Status Enable mask register. *ESR? *ESR? returns the value of the Standard Event Status Register. The register is then cleared (all bits 0). Comments Chapter 3 • Coupled command: No • *RST Condition: none • Power-On Condition: register is cleared Agilent E1441A SCPI Command Reference 125
