Download LCD - SuperMax

Stand and wall-mounting instructions (optional)
How to assemble the stand?
The LCD TV is assembled without the stand before leaving the factory, if you need
to assemble the stand, operate as follows:
-Before attaching/detaching the stand, make sure to turn off the TV.
-Before performing work, spread cushioning over the base area to lay the LCD TV on.
This will prevent it from being damaged.
1. Assembling instruction(Only for 32 model):
1) Fix the post on the stand with the five screws (size:M4*16).
2) Put the Television on the table(rear upwrd), fix the stand on the Television with the 6
screws given in the carton.(Figure 2)
2. Assembling instruction(Only for 42 model):
1) Fix the stand and the transition board together with screws. (Please refer to figure 1)
2) Attach the stand to the LCD TV. (Hold the stand so it will not drop from the edge of
the base area.) (Please refer to figure 2)
3) Fasten the screws used to secure the stand in place. (Please refer to figure 3)
- To detach the stand, perform the above steps in reverse order.
4 -M 5X8
Figure 2
Screws f or t he st and
8
Figure 3