Download INSTALLATION OPERATION MANUAL

USER MANUAL FOR WTP-25 POOL FILTER
——Pipe free, no plant room，low pump power consumption；
——LED underwater light, low power consumption(18w)；
——Inter cooling system, hot air is removed from the technical house by vacuum suction created by the
water jets ;
——Filter bag is easy to clean(using high pressure water）；
Recommend: WTP-25 is to recommend to be used for new swimming pool and renovation pool.
‹ Technical specification:
Power supply:
Power consumption:
Flow rate:
Ozone Generator:
Filtration precision:
220V/50Hz
1.6kw
25cbm/h
500mg/h
<=5μm
Underwater light:
Pump outlet:
Pump inlet:
Dimension:
Net weight:
18w/12V
Φ40mm
Φ40mm
1540*760*1020mm
65 kgs
INSTALLATION INSTRUCTION:
1. Layout to put the plant:
NOTE: before the paving of the pavement of the swimming pool, please connect a anti-corrosive and
waterproof electrical cables of 3x4mm2 (L, N, G) from the residual current device (RCD) of power supply
(8A/220V/50-60Hz which is our requirement) to the connection box of this plant.
(Fig. 2- Dimensions)
3