Download VS4800 - Visiplex

1. If an external transmitter is used, connect the antenna to the RF-OUT terminal at the back of the external transmitter. Connect
the transmitter data cable between the VS101-XX transmitter and the DATA I/O port at the back of the VS4800.
Otherwise, connect the antenna to the RF-OUT terminal at the back of the VS4800.
2. Connect the provided power supply to the POWER jack at the back of the VS4800 and turn the power switch to ON
position. The main menu should be displayed.
If you are using an external transmitter make sure it is powered on.
3. Press 4 for the Administration Menu and enter the default password (PASSWORD). The menu top line should display
Administration Menu.
4. Press 1 for Edit Device Details. Program a new device (see details on page 11).
5. Press ESC twice to return to the main menu.
6. Press 1 to send an alert to a selected device (see details on page 10).
7. Verify that the selected device received the alert sent by the VS4800.
Note: Do not place the VS4800 on top of the external transmitter as RF feedback may cause system malfunction.
9