Download User Manual

Transcript
HLS Displace
Softness applies a blur to the Displace Source. This is done to soften harshness
in a displacement map. If you find that the results look jagged, increase this
parameter.
Angle
Angle determines the direction of the distortion based on the hue of the pixel
that is being used to distort on the displacement map. The Hue starts with red
and cycles back to red after traveling through orange, yellow, green, blue and
violet.
Hue Min Angle
Hue Min Angle determines the direction of the pixels that are on the yellow side
of red in the displacement map.
Hue Max Angle
Hue Max Angle determines the direction of the pixels that are on the violet side
of red in the displacement map.
The distance that the displacement travels is based on the Lightness and
Saturation in the Displace Source. The Light Displace and Saturation Displace are
added together to determine that distance.
Light Displace
Light Displace is the strength or magnitude of the contribution of lightness to
the total displacement distance.
Saturation Displace
Saturation Displace is the strength or magnitude of the contribution of saturation to the total displacement distance.
Blend Original
Blend Original will blend in the unaffected original layer with the affected
layer. The higher this number, the more of the original layer will be blended in
with the affected footage.
102