Download Eye / Gaze tracking system Client Software User Manual
Transcript
Figure 27: Heatmap graphics mode. Gaze foci accumulate over time to build a picture of the most viewed areas on the screen. 6.6 Keyboard Commands The following keyboard commands can be used in specific graphics modes. Note that when keyboard capture is not enabled, the commands will not work! Graphics Mode Key Effect All ESC Turns everything off: Camera, tracking, toolbar, graphics. All x Turns off the toolbar and graphics, but leaves the system running Calibration c Triggers (enables) a calibration based on data collected so far Calibration d Deletes calibration data associated with the current user. This is useful if there is an error, of if you have captured some bad data. Calibration s Changes graphics mode to Spotlight Calibration q Changes graphics mode to seQuence Calibration h Changes graphics mode to Heatmap Spotlight c Changes graphics mode to Calibration Spotlight p Changes the way the spotlight is presented (cycle) Sequence c Changes graphics mode to Calibration Heatmap c Changes graphics mode to Calibration Heatmap r Resets the cumulative heatmap content 31