Download Eye / Gaze tracking system Client Software User Manual

Transcript
Figure 27: Heatmap graphics mode. Gaze foci accumulate over time to build a picture of the
most viewed areas on the screen.
6.6 Keyboard Commands
The following keyboard commands can be used in specific graphics modes. Note that when
keyboard capture is not enabled, the commands will not work!
Graphics Mode
Key
Effect
All
ESC
Turns everything off: Camera, tracking, toolbar, graphics.
All
x
Turns off the toolbar and graphics, but leaves the system running
Calibration
c
Triggers (enables) a calibration based on data collected so far
Calibration
d
Deletes calibration data associated with the current user. This is
useful if there is an error, of if you have captured some bad data.
Calibration
s
Changes graphics mode to Spotlight
Calibration
q
Changes graphics mode to seQuence
Calibration
h
Changes graphics mode to Heatmap
Spotlight
c
Changes graphics mode to Calibration
Spotlight
p
Changes the way the spotlight is presented (cycle)
Sequence
c
Changes graphics mode to Calibration
Heatmap
c
Changes graphics mode to Calibration
Heatmap
r
Resets the cumulative heatmap content
31