Download warning

Chain Disk Controller - APCD-295
The STATUS menu tells you:
•
If the test mode is active;
•
If the manual mode is active;
•
When the next feeding cycle will start;
•
When the drive units will stop (Shut Down Delay);
•
When the actuator will stop moving;
•
When the Actuator Delay will end.
•
When the Purge Time will end.
•
When the next dump will be performed;
•
What is the amperage draw of each drive unit;
1. Use the menu select buttons to select the STATUS main menu.
2. Use the arrow keys to scroll the display.
Run Time History
The APCD-295 keeps a daily history master Chain Disk run times. These values are kept in
memory for the past 6 days.
1. Use the menu select buttons to select the RUN TIME HISTORY menu. The total run time of
the last cycle is displayed.
1. Use the down-arrow key to scroll the display. The chain disk run times of the past 6 days are
displayed.
Time & Date
1. Use the menu select buttons to select the TIME / DATE menu. The current time and date
are displayed.
2. Press MODIFY. The hours flash on the display. Use the arrow keys to set the hours to the
PNEG-602 Chain Disk
69