Download National Instruments Expandable Direct Injector Driver

Tip Strip: VR Hall Fault Clear
Detail: Clears a fault condition where an input voltage is too negative to safely engage pull-up resistor on the
positive(+) side of input channels.
ModeSelectVRHall_ChX
Tip Strip: Mode select for VR/Hall Channel
Detail: Selects the mode of operation for each channel of the NI 9760.
VR Adaptive Arm: Disabled pull-up resistor. Self-adaptive arming threshold for zero-crossing detection.
VR Manual Arm: Disabled pull-up resistor. Manually (or programmatically) set arming threshold for zero-crossing
detection.
Hall: Disabled pull-up resistor. Manually (or programmatically) set logic threshold (no zero-crossing detection)
Hall w/ Pull-up: Enabled pull-up resistor. Manually (or programmatically) set logic threshold (no zero-crossing
detection)
See hardware manual for a more detailed description of each arming threshold mode.
Arming_ThresholdVoltageVRHall_ChX
Tip Strip: Assigns digital signal source to channel during Direct and TMP Modes
Detail: Arming (VR) or logic (Hall) threshold voltages used in 'VR Manual Arm' or Hall modes of operation. Min=0V,
Max=2.97V.
NI EDIDS-2400 Series User Manual | © National Instruments | 145