Download - Aplisens SA

Transcript
B1
20
DTR.APC.APR.FROFIBUS.02(ENG)
14. ADDITIONAL INFORMATION
The manufacturer reserves the right to make constructional and technological changes which do not lower the
quality of the transmitters.
14.1. Related standards
PN-EN 60529:2003
PN-EN61010-1
Degrees of protection provided by enclosures (IP Code)
Safety requirements for electrical equipment for measurement, control and
laboratory use. General requirements.
PN-82/M-42306
Screwed connectors of pressure gauges
PN-81/M-42009
Automatics and industrial measurements. The packing, the storage
and transport of devices. General requirements
PN-EN 1092-1:2004 (U)
Flanges and their joints – Circular flanges for pipes, valves, fittings and
accessories. – Part 1: Steel flanges
IEC-61158-2- Digital data communications for measurement and control - Fieldbus for use in industrial control
systems - Part 2:
PROFIBUS PA Profile for Process Control Devices ver. 3.0
15. FIGURES
PA-
PA-
PA+
PA+
Earthing terminal
internal
+
_
Coupler
Shield
Screen
Coupler-example:
SIEMENS 6ES7157-0AD00-0XA0
SIEMENS 6ES7157-0AC00-0XA0
SIEMENS 6ES7157-0AA00-0XA0
Fig.1. APC-2000..., APR-2000..., APR-2200... transmitters and SG... level – block diagram.
It is recommend to use shielded cable for types as below:
SINEC 6XV1 830-5AH10 produced by SiemensAG
SINEC 6XV1 830-3BH10 produced by SiemensAG
3079A produced by BELDEN
Technotronic-bus
O2YS(St)CY 1x2x0,64/2,6mm produced by Technokabel
Technotronic-bus
O2YS(St)CY 1x2x1,0/2,6 mm
produced by Technokabel
It is recommend to connect cable shield with earthing terminal of transmitter casing.
Earthing terminal of transmitter casing connect with mass circuit or earth.