Download STRIDE Surgical Technique

Introduction
About this Guide
This procedure guide provides an overview of the recommended
technique for using the Navio surgical system technology with the
STRIDE Unicondylar Knee System. Blue Belt Technologies recommends that the users review this guide prior to performing partial
knee replacement surgery utilizing the Navio system.
This guide should be used in conjunction with, not replacing, the
information contained within the NavioPFS™ User’s Manual that
accompanied the purchase of the Navio surgical system. Additional
information on the STRIDE Unicondylar Knee System and manual
instrumentation technique can be found in its labeling and in the
STRIDE Unicondylar Knee System Surgical Technique and Product
Specifications.
Intended Use - Indications
The Navio surgical system is intended to assist the surgeon in
providing software-defined spatial boundaries for orientation and
reference information to anatomical structures during orthopedic procedures. The Navio surgical system is indicated for use in
surgical knee procedures, in which the use of stereotactic surgery
may be appropriate, and where reference to rigid anatomical bony
structures can be determined.
These procedures include unicondylar knee replacement.
The Navio surgical system is indicated for use with cemented
implants only.
Consult STRIDE Unicondylar Knee System labeling for its intended
use, indications and contraindications.
The Navio surgical system is not intended to be used on children,
pregnant women, or any other patients contraindicated for unicondylar knee replacement surgery.
4