1
Download User Manual - Data Loggers
Transcript
Data Logger Software Device Detail Tab The Device Detail tab displays the details of the device. An example of a Temp101 data logger is seen in the screen below: The details include device type (device name as heading), revision number, subtype, and channel information. Information about Alarm Setting, Thermocouple Type, Engineering Units, Trigger Settings, Wireless Configuration, Wrap Around and Calibration will be displayed when the device supports these features. Note: When these features exist, a corresponding button will be displayed on the lower right side of the screen. An Alarm Settings & Calibration button are displayed in the example on the screen above. The following details are described as follows: Alarm Settings Select Alarm Settings to display an alarm setting screen that will permit the alarm range to be changed. See page 81 for full operating instructions. Page 51
