Download Adept 550 Table-Top Robot User`s Guide

Chapter 4 - Robot Installation
4.1
Environmental and Facility Requirements
Facility Ambient Air Quality
Temperature: 5° to 40° C (41° to 104° F)
Relative humidity: 5 to 90% non-condensing
Robot Workcell Free Space
The workcell design should allow the Adept 550 freedom of movement within the area
specified in Figure 2-5. Additional allowances maybe required to accommodate any
installed end-of-arm tooling.
4.2
Unpacking and Inspecting
Before Unpacking
Carefully inspect all shipping crates for evidence of damage during transit. Pay special
attention to tilt and shock indication labels (if they are present) on the exteriors of the containers. If any damage is indicated, request that the carrier ’s agent be present at the time
the container is unpacked.
After Unpacking
Compare the actual items received (not just the packing slip) with your equipment purchase order and verify that you received everything you ordered.
Inspect each item for external damage as it is removed from its container. If any damage is
evident, contact Adept at the number listed in Chapter 1.
Retain all containers and packaging materials. These items will be necessary to settle damage claims or to relocate the robot.
Repacking for Relocation
If you relocate the robot, reverse the installation procedures that follow this section. Reuse
all original packing containers and materials, and follow all safety notes used for installation. Improper packaging for shipment will void your warranty.
!
24
CAUTION: The Adept 550 robot with the inner and outer links fully
extended has a center of gravity beyond its base. If an unmounted Adept
550 is fully extended, it may fall and cause substantial damage. Always
fold the links in towards the center if the robot is not mounted.
Adept 550 Table-Top Robot User’s Guide, Rev A