Download DHD-1000en

Mechanical parameters, operation
The height of the encoder is 1 unit (1U) with 19’’ width and is supplied with standard
power cable.
In case of rack-mounted usage, the operator should take care of the proper airflow and
ventilation! Do not cover the case because it could cause overheating!
Hardware structure
Front Panel:
State indicator LEDs LCD
State indicator LEDs:
Power OK
TS proper
Decoder is busy, boot procedure
Serious internal problem
LCD:
2 line 40 character alphanumerical display, representing the state of the equipment on 6 pages:
1st page:
TS MAC Address:
The MAC address of the UDP/IP marked ETH port
TS IP:Port:
The IP address of the UDP/IP marked port separated by a colon is
the port
2nd page:
Multicast MAC Address:
The MAC Address of the multicast receiving in hexadecimal
format
Multicast IP Address:
The IP address of multicast receiving
3