Download JetView 200/300 Series

JetView 200/300 Series
Installation
Ethernet Connection
Introduction
This chapter describes how the cable is connected in order to establish an
Ethernet connection between a JetView 200/300 and a controller or a PC.
RJ45 Ethernet Jack
Pin assignment of the RJ45 jack X14 of JetView 205/305 and 310:
RJ45 Ethernet Jack
View: Connector X14 (female) Pin
Signal
1
TX+
2
TX-
3
RX+
Comment
4
5
6
RX-
7
8
Direct Connection
To directly connect a JetView to a controller or a PC a crossover cable is to
be used.
Connection via Ethernet
Switch
To connect a JetView to a controller or a PC via switch a straightthrough cable is to be used.
Some switches/routers feature an automatic crossover function which
ensures automatic adjustment to the cable and the connected device. If
this is the case, both cable types (straight-through/crossover) can be used.
Related Topics:
Serial Connection on page 32
Jetter AG
31