Download User Manual

YACHT ROUTER
9.YR CONTROL SOFTWARE - SETUP PAGE
Setup page is divided in three sections: WAN Networks (Satellite, Mobile, Shore), Vessel Networks and General Setup.
On the following picture you can see Setup page of Yacht Router Pro.
BACK - back to HOME page
Configurations - open Configuration setup page.
Contact Us - open page with Locomarine contact details.
Support Network - network connection used for Remote
Support. To use this feature Vessel Network 1 must be
connected to the Internet. You can use this feature if you
need Remote Support from our Technical Support. More
details in chapter 9.1. Remote Support on page 12.
Vessel Networks - open setup page for each Vessel
Network. Number of available buttons depends on Yacht
Router model (Micro: 1, Mini: 2, Standard: 3, Pro: 9).
Shore WIFI WAN Networks open Shore WIFI Wan
Network setup page.
Mobile WAN Networks open Mobile Wan Network
setup page.
Satellite Wan Networks - open Satellite Wan Networks
setup page. These buttons are not available on Yacht
Router Micro as it does not support satellite WAN source.
On Yacht Router Mini only one button is available as it
support only one satellite WAN source. Yacht Router
Standard and Pro support dual satellite WAN sources.
Clock - indication that Yacht Router is busy. Any changes
that you make while clock is visible will not have any effect.
Wait until clock indicator disappear.
11