Download LYNX Touch Security System

USER FUNCTIONS
Automation
Rules
Up to 40 rules can be programmed. Rules 1 through 20 are used for Triggers, Z-Wave Scenes
and Follow-Me Messages. Rules 21 through 40 are used for Z-Wave Scenes and for E-mail
notification and are only accessible through TotalConnect Service. Check with your Installer
to see which options are available to you.
The following options are programmed in this section:
Programming Field
Rule 1 - 20:
Name:
Type:
Action:
Start Zone Type:
Stop Zone Type:
Start System Operation:
Stop System Operation:
Zone Number Operation:
Action
Select Rule 1 -20
Note: Rules 21-40 are only accessible through TotalConnect Service.
Name the device
Select the output type
Select the action required for the device
Select Zone Type to start event
Select Zone Type to stop event
Select System Operation to start event
Select System Operation to stop event
Select Zone Number to trigger event upon fault, trouble or alarm as selected.
Programming Rules
Ready To Arm
1. With the system in the disarmed state,
select the “Automation” icon from the
Home Screen. The system displays the
Keypad screen.
72
Zones
Arm Away
Arm Stay
Message
10:18 AM June 8, 2010
Delay
Automation
Phone
More
5100-100-004-V0
Ready To Arm
68
Switches
Scenes
Thermostat
Schedules
Locks
Rules
2. Select the “Rules” button. The system
displays the Rules screen.
Garages
5100-100-099-V1
– 50 –