Download Thermo Scientific Orion

Analyzer Operation | Chapter 3
Note: The following menu options are for analyzers with two modules installed only. If two channels are used, select the channel number
in the main setup mode (CH1 or CH2) and additional menu options will be displayed.
Default
Operator Action
Scrolling Marquee
Main Display
Notes
CH1
CH1
(flashing)
SEL
SCrn
CH1 will not be shown in scrolling
marquee if only one board is installed
MDL
(flashing)
SEL
CH1
CH1
(flashing)
SEL
SCrn
Scrolling Marquee
Main Display Notes
CH2
(flashing)
SEL
SCrn
MDL
(flashing)
SEL
CH2
CH2
(flashing)
SEL
SCrn
to set the channel 1 specific
Press
menus in the setup mode
to loop through the channel
Press
specific menu options
to select a menu option
Press
and customize the parameter (refer to
the menu option displays that are shown
on the following pages for detailed
instructions)
Press
to scroll to the next menu
Default Operator Action
CH2
CH2 will not be shown in scrolling
marquee if only one board is installed
to set the channel 2 specific
Press
menus in the setup mode
to loop through the channel
Press
specific menu options
to select a menu option and
Press
customize the parameter (when a pH/ORP
or conductivity board is installed on channel
2, refer to the Thermo Scientific Orion 2100
Series pH/ORP Analyzer and Conductivity
Analyzer User Guide for detailed instructions
on the menu option displays)
Press
Thermo Scientific
to scroll to the next menu
2117LL Low Level Chloride Analyzer | 3-17