Download Technical Manual Lumistar Data Processing System (LDPS) Part

Lumistar Data Processing System (LDPS)
Technical Manual
Part-2
Client Application
This option will globally allow the user to turn the stale data checking on or off,
regardless of how the database is configured.
Always Load Project Automatically – When this option is selected, the client, upon
startup, will always load the same project that the server has already loaded. Thereafter,
the user has to manually load and unload the project on the Client. Also, if this option is
selected, the application will continually check and load the project if it is not already
loaded. The check is performed at five-second intervals. This gives enough time to get
into options and reset this in case this feature is not wanted.
Disallow Archives and Hardcopies – If this option is checked, the user will not be
allowed to archive data or make hardcopies.
Alert On Server Project Close – If this option is selected, and a project is loaded and
the server shuts down the project, then the user is alerted with a prompt to save any edited
display pages before the client unloads the same project. This option is normally enabled
on network systems and disabled on stand alone systems.
Embedded Audio Default is Playing – Select this option to automatically start playing
embedded audio. The default is not to automatically select Play.
Embedded Video Windows On Top – Select this option to always have the embedded
video displays appear on top of other displays.
Soft Decom break out audio – Select this option if the user’s software decommutator is
to extract audio data instead of having the program extract them. An example of this use
would be for chapter 8 streams, where the upper 8 bits are decoded bits, and the lower 16
bits are the audio bytes.
Soft Decom break out video – Select this option if the user’s software decommutator is
to extract video data instead of having the program extract them.
3.8.3.1 Startup Section
Load Last Display List – If this option is selected, then when the client program is
started up again, the last valid display list shown will automatically be displayed again.
Load Last Display Page – If this option is selected, then when the client program is
started up again, the last valid display page shown will automatically be displayed again.
Remember Page Size Position – Normally, pages are displayed in 80% of the total
screen real estate when they are called up. If this option is selected, then the size and
position of the page when it was previously saved will be restored when the page is again
recalled.
Disable Network – If this option is selected, then the network will not be used for
communications with the server, even though there may be a network interface card in
U0990102
Lumistar, Inc.
Page 28
11/20/2006