Download CalVIEW User`s Manual

Drivven, Inc.
CalVIEW
The Fault Point tab in the CalVIEW Master dialog contains the summary of
all fault points found on the target. Double clicking on a Fault Point will open the
CalPoint Configuration dialog box and allow changes to be made.
Figure 15: CalVIEW Master CalScope Setup
The CalScope tab contains the base setup for the CalScope controls. The
user specifies the total number of scopes (up to 8) desired. Each scope also
requires a dedicated memory buffer. All other CalScope configurations are
handled during run-time by the user via the host user interface.
Figure 16: CalVIEW Master A2L File Setup
© Drivven, Inc. 2009 • CalVIEW • Version 2.90
20