Download 6102 Scope multimeter

The International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further
information.
This symbol adjacent to one or more terminals identifies them as being associated with ranges that may, in normal
use, be subjected to particularly hazardous voltages. For maximum safety, the test leads should not be handled
when these terminals are energized.
Double Insulation (Protection Class)
500V MAX
CAUTION
WARNING
This symbol advises the user that the terminal(s) so marked must not be connected to a circuit point at which the
voltage, with respect to earth ground, exceeds (in this case) 500 VAC or VDC.
The CAUTION symbol indicated a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury
The WARNING symbol indicates a potentially hazardous situation which, if not avoided, could result in
serious injury or death
Table of Contents
SAFETY AND WARNINGS........................................................................................................................................................ 1
INTRODUCTION....................................................................................................................................................................... 4
Features.................................................................................................................................................................................4
Survey of the Keys.................................................................................................................................................................4
BASIC OPERATION.................................................................................................................................................................. 5
Power On and Off.................................................................................................................................................................5
Auto Power Off..................................................................................................................................................................... 5
Backlight...............................................................................................................................................................................5
Battery Level Indicator.........................................................................................................................................................5
Battery Charge......................................................................................................................................................................5
The Use of AC Adapter......................................................................................................................................................... 5
Reset the Instrument..............................................................................................................................................................6
DMM OPERATION.................................................................................................................................................................... 6
Select DMM Mode................................................................................................................................................................ 6
Basic Displays of the DMM Mode........................................................................................................................................6
Select the Function of DMM.................................................................................................................................................6
Auto/Manual Range Selection...............................................................................................................................................7
Data Hold..............................................................................................................................................................................7
AC and DC Voltage...............................................................................................................................................................7
dB Display.............................................................................................................................................................................8
AC and DC Current (400mA, 20A).......................................................................................................................................8
Frequency Counter and Duty Cycle......................................................................................................................................8
Resistance and Conductivity.................................................................................................................................................9
Continuity..............................................................................................................................................................................9
Diode Test............................................................................................................................................................................10
Capacitance........................................................................................................................................................................ 10
Relative Mode..................................................................................................................................................................... 10
Peak Hold (P-H) Mode.......................................................................................................................................................10
Communication in DMM mode...........................................................................................................................................11
Save and Recall the Data of Measurement.........................................................................................................................11
Communication in DMM database.....................................................................................................................................12
DSO OPERATION................................................................................................................................................................... 12
Select DSO Mode................................................................................................................................................................12
2