Download 6102 Scope multimeter

Input impedance
about 10MΩ
indexing
Vertical ± 4.8, horizontal 12.8
Vertical
50mV/div ~ 200V/div
When range
0.20µs/div ~ 20s/div
±(5%+ 0.1div)
When
sensitivity range
Vertical
amplitude
yankees
precision
accuracy
Automatic
zero
the
±(0.01% + 0.1div)
In DC/dB measurement
Scanning mode
Auto/normal/single
Trigger level
± 12 div (At each step, 0.1div)
Trigger slope
Rising along/down along
Trigger position
± 6 div (At each step, 0.1div)
Automatic
When the vertical amplitude and automatic
Settings
Settings
Automatic
Vp-p, Vavg, RMS, dBm
reference
adjustment
The
cursor
dV, dt, 1/dt (Frequency)
measurement
measurement
function
Automatic
function
Record length
±(5%+ 0.1div)
12.8div
measurement
accuracy
* 10MHz refers to simulate bandwidth to 3db voltage when the attenuation of bandwidth, when the input signal interference,
change with ADP08 and special high frequency shield.
* 1-2-5 for vertical attenuation switch range
Digital Multimeter
Function
DC Voltage
AC Voltage (True RMS)
Range
400.0mV
4.000V
40.00V
400.0V
1000V
400.0mV
4.000V
40.00V
400.0V
Resolution
0.1mV
1mV
10mV
100mV
1V
0.1mV
1mV
10mV
100mV
Accuracy
±(0.75%rdg + 10dgt)
750V
40.00/400.0mA
4.000/20.00A
40.00/400.0mA
4.000/20.00A
400.0Ω
4.000K
40.00K
400.0K
4.000MΩ
40.00MΩ
51.20nF
1V
10/100µA
1/10mA
10/100µA
1/10mA
0.1 Ω
1Ω
10 Ω
100 Ω
1K
10K
1pF
50Hz~1kHz : ± (1.5%rdg + 10dgt)
±(1.2%rdg + 10dgt)
512.0nF
10pF
± (1%rdg + 3dgt)
5.120μF
100pF
± (1%rdg + 3dgt)
51.20μF
1nF
± (1.5%rdg + 3dgt)
± (1.5%rdg + 10dgt)
50Hz~1kHz: ±(1.0%rdg + 10dgt);
1kHz~10kHz: ±(2.0%rdg + 10dgt);
10kHz~50kHz: ±(3.0%rdg + 10dgt);
(above 50kHz not specified)
DC Current
AC Current (True RMS)
Resistance
Capacitance
±(1.5%rdg + 10dgt)
50Hz~1kHz (above 1kHz not specified)
±(1.0%rdg + 5dgt)
± (3.0%rdg + 5dgt)
± (2%rdg + 10dgt)
100.0μF
10nF
May need 30 sec.
Frequency Counter
5.12Hz ~ 5.12MHz
0.1Hz ~ 1kHz
± (1.0%rdg + 5dgt), (The signal amplitude ≥ 3Vpp, AC V or 20mA RMS, AC A)
Duty Cycle
Diode
Continuity
Auto range
Over range
0.1~99.9%
Open circuit voltage 1.5 V, maximum current about 1.5mA
Sound when lower than 30Ω
For every function
Indicates “O. L” (Over load)
21