Download MHI-2000 Technical Reference Manual

Control Commands from the Host
TOLER Command
When sent over STARNODE or TCP/IP, use this format /TOLER.
When sent serially, use this format ~TOLER~.
The TOLER command is used to return outzone deviation statistics for the last 11 boxes. It will
display a report such as:
Object 0 outzone deviation = 0 *
Object 1 outzone deviation = 0
Object 2 outzone deviation = 0
Object 3 outzone deviation = 0
Object 4 outzone deviation = 0
Object 5 outzone deviation = 0
Object 6 outzone deviation = 0
Object 7 outzone deviation = 0
Object 8 outzone deviation = 0
Object 9 outzone deviation = 0
Object 10 outzone deviation = 0
Object 11 outzone deviation = 0
OUTZONES: Late=0 Early=0 Unexpected=0 Missing=0 On time=0
Host Commands &
Downloads
5
Rev A, January 2002
MHI-2000 Technical Reference Manual
5-17