1
Download ProfiTrace Manual - Streamline Process Management
Transcript
ProfiTrace 2 – User Manual 12.1.2 Automatic busparameter detection This paragraph describes the automatic busparameter detection. This mechanism is very powerful because the chance that ProfiCaptain corrupts the data communication in a running multi-master installation is extremely small. After clicking on “Auto detect busparameters”, ProfiCaptain will display the detected busparameters and advise a free available master address. It also fills a simple Live List with devices that show bus activity. From this point the user has also influence to alter the detected settings. Click “OK” to confirm. The master is still NOT active on the bus. This has to be done in the next dialog. _______________________________________________ Version 4.3.1 – November 2013 Page 86 / 148 ProfiTrace2-Manual-EN.docx © PROCENTEC 2003-2013 - Copyright - all rights reserved
