Download MCB251 Evaluation Board
Transcript
MCB251 Evaluation Board User’s Guide Chapter 2. Setup The MCB251 evaluation board requires power and a serial connection to a PC running the MON251 terminal program. Before you start, make sure you have satisfied the following hardware and software requirements. Hardware Requirements n The MCB251 Evaluation Board. n A serial cable, 9-pin male to 9-pin female, 1-2 meters long, wired one-to-one. n A PC with an available RS-232 port. If the port has a 25-pin connector, a 9-pin male to 25-pin female adapter may be required. n A device programmer is required to program any EPROMs or other programmable devices. Software Requirements n The Keil MON251 terminal program (MON251.EXE) or the Keil dScope for Windows with the MON251.DLL driver. The Keil MON251 software/firmware is already programmed into the EPROM provided on the MCB251 board. n Microsoft Windows version 3.1, 3.11, Windows 95, or Windows NT. 3