Download 6. Configuring the Gateway

6. Configuring the Gateway
6.13.2. “ABC-LUFP” Element
The sole command accessible from the “ABC-LUFP” menu is “Disconnect” (or “Connect” if you are in “off-line”
mode); please refer to chapter 6.3., Connecting to / Disconnecting from the Gateway, for details about “on-line”
and “off-line” modes.
In the configuration of the LUFP9 gateway’s “ABC-LUFP” element, the “Physical Interface” and the “Protocol Mode”
properties must not be changed. Their value, respectively, must always be set to “Serial” and “Master Mode”.
97