1
Download SPARC/CPU-5TE Technical Reference Manual
Transcript
Hardware Description 3.10.5 SPARC CPU-5TE Technical Reference Manual vme_slavebase3 Register If you read the 8-bit value of the vme-slavebase3 register, you get the 256-Mbyte boundary (B)ase address of the VMEbus slave base address, bits A31_B..A28_B. Writing any data to that register clears the pending non-maskable interrupt of the VME SYSFAIL signal. Physical Address Register Name Read/Write Access $7138 0002 vme_slavebase3 r/w 8 bit Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 1 1 1 1 A31_B A30_B A29_B A28_B NOTE: The bits A31_B..A28_B are read only. Bits [7..4] are always read as ones if the program algorithm for the serial loading of the VMEbus slave base address is used. This is described in the “vme_slavebase1 Register” on page 114. Page 116 FORCE COMPUTERS
