1
Download Model 2700 Multimeter/Switch System
Transcript
11-10 Status Structure Model 2700 Multimeter/Switch System User’s Manual Serial poll programming example This example is written specifically for the KPCI-488.2 GPIB card and QuickBasic/ VisualBasic with the appropriate IEEE libraries. Other types of cards and/or languages may have different function calls that are equivalent to the initialize(), transmit(), send(), srq, and spoll() calls used below. SRQ when buffer fills with 500, 1000, 1500, and 1750 readings The following program will store 2000 readings in the buffer. When the buffer fills with 500 readings (quarter full), an SRQ will occur and a message will be displayed on the computer to indicate that event. An SRQ and message will also occur when the 1000th (half full), 1500th (three-quarter full), 1750th (buffer notify), and 2000th (full) reading is stored.
