Download Manuals - OMEGA Engineering

2.0 Installation
2.1 Mounting and Access
Before mounting the LDX-D, please refer to section 2.10.
Hook the LDX-D on the DIN rail with the release clip facing down and push onto the rail until a ‘click’ is heard.
To remove, use a screwdriver to lever the release clip down. Pull the bottom of the housing away from the rail and unhook.
LDDRXC-D
DIN Rail
12
3
LDX-D
DRC
4
Cover release latch
Withdraw PCB
To access internal links, the front cover and PCB must be withdrawn from the housing. Use a screwdriver or similar tool to
depress the top latch. The cover will spring forward. Repeat with the bottom latch, then gently pull the PCB out.
2.0 Installation
4
M-4346/1113