1
Download Instruction Manual PENETRATING PULSE TECHNOLOGY
Transcript
3.2 System components The SONOMETER 30 system consists of the following components: • the SONOMETER 30 evaluator • one or two ultrasonic sensors of AE series • fixing bracket on the vessel • connecting cable between sensor and evaluator. The selection of the suitable ultrasonic sensor and the appropriate bracket depends on • the geometrical shape of the vessel, • the material of which the vessel is made, • the nature of the monitored liquid. Our service staff will be glad to assist you in choosing the most suitable sensors and brackets. The following types are currently in the market: Sensor Type Frequency Temp. Sensor Mounting AE01, Spec. 01 1 MHz No Screw-on module AE01, Spec. 02 1 MHz Yes Screw-on module AE01, Spec. 05 1 MHz No Screw thread M30x1.5 AE01, Spec. 06 1 MHz Yes Screw thread M30x1.5 AE20, Spec. 01 500 kHz No Screw-on module AE20, Spec. 02 500 kHz Yes Screw-on module AE20, Spec. 05 500 kHz No Screw thread M45x1.5 AE20, Spec. 06 500 kHz Yes Screw thread M45x1.5 Page 8
