Download New Eagle Automated Testing User Manual






Verify Time: This is the default amount of time NEAT will wait before determining
that a value does not match the required value in a Verify action (see Verify 7.27.2
below).
Default Delta: This is the default value for floating-point equality comparisons.
CAN Channels: This is where the user may add CAN channels to use on the Kvaser
device that connects to the test harness.
Baud Rate: This is the baud rate used on the designated CAN channel.
Name: Name of the CAN channel as defined in the model file.
Figure 3 - Create Test File Dialog
Note: These test script settings can be edited later by clicking the
navigator pane on the left side of the NEAT console.
button above the
4.2 Script Editor
Once the script is loaded, you will be in the test editor, which looks like this:
New Eagle Consulting
3588 Plymouth Road, Box #274
Ann Arbor, MI 48105-2603
New Eagle Confidential
PH: 877.234.1410
FAX: 928.395.2114