Download Downloads

Chapter 3 BIOS Setup On (Default) Ø Typematic Rate Setting This option can be set to “Enabled” or “Disabled”. When it is set to “Enabled”, if press certain key without release, the computer will regard that you’ve pressed the key repeatedly. When it is set to “Disabled”, if press certain key without release, Disabled (Default) Enabled Ø Typematic Rate(Chars/Sec) If “Typematic Rate Setting” is set to “Enabled”, then you may set to press certain key for one second equals to pressing the key for several times via this option. Ø Typematic Delay (Msec) If “Typematic Rate Setting” is set to “Enabled”, then you may set to press certain key and then regard as pressing this key repeatedly after certain time delay via this option; the unit is ms. Ø Security Option When chosen “system”, it will prompt to enter password when booting; when chosen “setup”, it will prompt to enter password when entering BIOS setup. System Setup: enter “Setup” interface. (Default) Ø APIC Mode Enable or disable APIC Disabled Enabled (Default) Ø Small Logo (EPA) Show When this option is enabled, it is to display the energy star logo of EPA during booting. Disabled (Default) Enabled Ø Auto Detect PCI CLK
EPE­1814V2NAR ­ 27 ­