Download Firewall Configuration examples

SecPath Series Firewalls Virtual Firewall Configuration Examples
On Device A, display the routing table of the virtual firewall after VPN instances are associated with
the interfaces.
[DeviceA]dis ip routing-table vpn-instance vpn1
Routing Tables: vpn1
Destinations : 10
Destination/Mask
Proto
10.1.1.0/24
Routes : 10
Pre
Cost
NextHop
Interface
Direct 0
0
10.1.1.1
GE1/1
10.1.1.1/32
Direct 0
0
127.0.0.1
InLoop0
20.1.1.0/24
Direct 0
0
20.1.1.1
GE1/3
20.1.1.1/32
Direct 0
0
127.0.0.1
InLoop0
30.1.1.1/32
Direct 0
0
127.0.0.1
InLoop0
31.1.1.1/32
OSPF
2
100.1.1.2
GE1/0
100.1.1.0/24
Direct 0
0
100.1.1.1
GE1/0
100.1.1.1/32
Direct 0
0
127.0.0.1
InLoop0
127.0.0.0/8
Direct 0
0
127.0.0.1
InLoop0
127.0.0.1/32
Direct 0
0
127.0.0.1
InLoop0
10
The above output information shows that multi-VPN-instance through OSPF is effective.
Copyright © 2010 Hangzhou H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C
Technologies Co., Ltd.
The information in this document is subject to change without notice.
Hangzhou H3C Technologies Co., Ltd.
www.h3c.com
11/11