Download STREAMPIX 5
Transcript
Norpix Inc - www.norpix.com StreamPix 5 Tech Support:[email protected] Multi-Workspace Display Switch : If enabled, when all workspaces are selected, switching the display to LIVE (or playback) will be done on every workspaces (not just on the current). Zoom Minimum zoom factor (%) : The minimum zoom factor allowed when zooming out. Maximum zoom factor (%) : The maximum zoom factor allowed when zooming in. Zoom in/out steps (%) : The zooming steps. For example, 10 means that each zoom in/out action, will change the zoom by 10%. QuickZoom The QuickZoom allows to quickly browse an image content. Two different zoom level can be preset to zoom in or out the image. Set the Full View value to the zoom factor at which the whole image is visible in the display area. QuickZoom Level 1 : Set the zoom factor to a specific value when holding "Ctrl" while clicking in a display. The zoom will be centered on the pixel under the mouse. QuickZoom Level 2 : Set the zoom factor to a specific value when holding "Ctrl-Shift" while cliking in a display. The zoom will be centered on the pixel under the mouse. QuickZoom Full View : Set the zoom factor to a specific value when using the "Ctrl-*" key combination. The zoom will be centered on the pixel under the mouse. ROI QuickZoom minimum size : Set the minimum size allowed for the Zoom ROI. The ROI QuickZoom allows to make a zone of the image use the full display area. If it is smaller than the minimum size, the ROI size will be increased accordingly. (Note : If the ROI is smaller than 4x4 pixels, the ROI action will be ignored) Docked Dialog (Not available in the Single Camera version) Which workspace is shown in the docking panel for each mode, Single or Multi-Display, can also be selected here. Differentiating each display of a MutiDisplay array is facilitated by setting secific colors for each one in the Select Workspace Color in the Workspace tab. StreamPix5 - Copyright Norpix Inc. (C) 2013 (74/187)