Download OSPC Version 2.50 connected to Avaya

Absence Info Server (AIS)
Installation
Additional components
The installation program installs AIS as an NT-service. You are prompted to
enter all necessary parameters. Before the installation is complete, AIS
starts in configuration mode. This lets you change or set the parameters
you entered and other parameters.
You can start the AIS service from the AIS Config UI (user interface). Or
you must start the service using Computer Management/Services or by
restarting the PC. The installation does not start the service.
Parameters that are required during installation:
1. Installation path
Use the default path or specify a path.
2. Local User
These parameters define the local Windows user under which you want the
service to run. You can change these settings later using Computer
Management/Services/Log on.
3. Configuration parameters for Exchange Server
These parameters define the mailbox and you want to use to authenticate
Exchange Server.
You can change these parameters using the AIS Config UI.
Example:
Server: exchange2003; User: OOFReply; Domain: AVAYA; Password: *****
4. Connection parameters for OSPC Web server
These parameters define the connection to the OSPC Web server.
Example:
host: OSPC_Server; port: 21080
5. Connection parameters for the TTrace server
These parameters define the connection to the TTrace server.
You can change these parameters using the AIS Config UI.
Example:
host: localhost; port 10300
The AIS Config UI is started automatically at the end of the installation.
OSPC v2.50
Version: 07/08
37