Download User manual

Menu
4.6
language
ODQJXDJH Choose the language that you want the information to be displayed in here.
Menu
4.7
holiday setting
If a room sensor is installed and activated the desired room temperature (°C)
is set during the time period. This setting applies to all climate systems with
room sensors.
If a room sensor is not activated, the desired offset of the heat curve is set.
This setting applies to all climate systems without room sensors. A one degree
change in room temperature requires one increment for under floor heating
and approximately two to three increments for the radiator system.
Vacation scheduling starts at 00:00 on the start date and stops at 23:59 on
the stop date.
TIP
Complete holiday setting about a day before your return so that room temperature and hot water have time to regain usual levels.
TIP
Set the vacation setting in advance and activate just before departure in order
to maintain the comfort.
Menu
4.9
advanced
Menu advanced has orange text and is intended for the advanced user. This
menu has several sub-menus.
Chapter 3 | VVM 500 – at your service
NIBE™ VVM 500
51