Download CC-Link IE Field Network Analog-Digital

CHAPTER 7 VARIOUS SETTINGS
CHAPTER 7
VARIOUS SETTINGS
This chapter describes how to set up various settings of the A/D converter module.
7.1
Parameter Settings
Set the parameter of this module with the network parameter written to the CPU module of the master station. For the
setting procedure of the master station, refer to the following:
 User's manual for the master/local module used
Remark
● Place a checkmark in the "Set the network configuration settings in CC IE Field configuration window" box on the
"MELSECNET/CC IE/Ethernet Module Configuration" window in advance.
● To select the main A/D converter module in the CC IE Field Configuration window, select "NZ2GF2B-60AD4" from the
"Module List" window.
7
● To select an extension module in the "CC IE Field Configuration" window, select the following models from the "Module
List" window.
Extension module type
Name
NZ2EX-16 (DI)
Extension Digital Output Module
NZ2EX-16 (DO)
Extension A/D Converter Module
NZ2EX2B-60AD4
Extension D/A Converter Module
NZ2EX2B-60DA4
● Setting fewer points of the remote I/O signal or remote register than actual points that the main A/D converter module or
the extension module possesses does not cause an error. In this case, data of all the set points are subject to cyclic
transmission in order.
69
7.1 Parameter Settings
Extension Digital Input Module