Download User Manual

iViewHD Userʼs Manual
Services Web Page
The Services web page allows you to change the iViewHD device name, the HTTP port that various
iViewHD services use (such as the web page and the MJPEG streaming), various TCP keep-alive parameters and an extra port offset.
Change Device Name
The device name is the name that iViewHD uses to advertise its services and is seen by the Bonjour
browser. The factory default name is in the form iViewHD-TT (XXXXXX), where TT is either 2M for a
2 megapixel camera or D1 for a D1 camera. XXXXXX are the last 3 digits of the iViewHDʼs MAC address in hex You can change the name to anything up to 32 characters. You should try to keep names
unique on your network if you are using multiple iViewHDs to more easily distinguish among them.
This web page also displays the Link Local name. The link local name is a DNS safe name that is derived from the device name. Operating systems which support the mDNS (Bonjour) protocol allow you
to address iViewHD using the Link Local name.
Change Port Values
You can also change the HTTP port number that iViewHD supports. Normally you will leave this port
number at its default value. The HTTP protocol is used to communicate with iViewHDʼs web server
and also provides access to the JPEG and MJPEG camera images
© 2009 NetMedia, Inc.
21