Download USER MANUAL

7
2 Transmitter Panel
4. Stic
d usting
Tighten the screw when finishing adusting.
In HELI mode, it is used to switch NORMAL mode
and IDLE mode. In AERO mode, it controls
channel6.
it is used to control dual rate of aileron, elevator and
rudder.
System Setting
In AERO mode, it controls channel .
In HELI mode, it controls channel7.
See section-7
See section- .10
and
There are three items "S1", "S2", "S3" and "S4".
3 Batteries C arging
S1. Model choice
Support seven models, see Section-10
S3. Stick type choice
S4. Low voltage gate
Set the voltage gate of low battery warning