Download Manual

Fig.25
Alarm limits setting range:
SpO2: Upper alarm range: 71-100
The default SpO2 upper alarm is 100.
Low alarm range: 70-99
The default SpO2 low alarm is 95.
PR: Upper alarm range: 31-254
The default PR upper alarm is 120.
Low alarm range: 30-253
The default PR low alarm is 50.
SYS Upper alarm range: 61-255
The default PR low alarm is 160
Low alarm range: 60-220
The default PR low alarm is 90.
DIA Upper alarm range: 31-220
The default PR low alarm is 95
Low alarm range: 30-180
The default PR low alarm is 60.
MAP Upper alarm range: 31-220
The default PR low alarm is 110
Low alarm range: 30-200
The default PR low alarm is 60.
SpO2/PR/SYS/DIA/MAP switch：
ON：Turn on the alarm.
Off：Turn off the alarm even though the value is out of limits.
Note:
1. When the monitor is turned off, the alarm limits of the latest set are restored, so
after the monitor is turned on, please set alarm limits again if necessary.
2. The alarm set should be handled by the qualified personnel.
CHAPTER 11 Real Print Set(Optional)
The monitor can print data by configured printer such as B6 printer.
In the menu 2 screen, press the
or the
button to select the “ Real Print Set” item,
and then press the
button to enter into the item. Refer to the Fig.26. Press the
or
button to select the sub-items to set up. And press the
button to enter. Set the
selected item by pressing the
or
button, then press the
button to confirm.
Press the
button to returning to the previous menu.
- 31 -