Download Project Report Fall 2012

Appendix
User Manual
The purpose of this document is to guide the user step by step through the process of: (1)
controlling the sensor nodes remotely with Labview, and (2) updating sensor node software
through the gateway. Both can be done in two ways:
1. On the FGCU network using 172.28.xx.yy addresses.
2. From any network using ports 3580 and 3581, once they are open (assuming port 8080 is
already open).
1. Importing the Gateway into Measurement and Automation 5.1
1.1. Open Measurement and Automation 5.1. In the screen that appears, click Remote
Systems
Wireless Sensor Network 14