Download CONTROL PANEL CA-64

34
Usre’s Manual
V Tpar
V MnPl
CA-64 SATEL
partition timer,
control panel main board.
Some of event descriptions allow readout of two identifiers, for example: partition
number and zone number, keypad number and user number, etc. To read the
second identifier, press one of keys: Ñ (change of the parameter displayed for the
currently displayed event only) or Ð (change of the parameter displayed for all
events). Next pressing of the key changes the identifier displayed to the previous
one.
Either viewing of all events or viewing of selected events is possible. Also, you may
choose partitions to be viewed. The selection is made for partitions accessible for the
user, who called the function.
If the user wants to view selected events, he has to mark at least one event type,
otherwise the menu function “Viewing” is not accessible (see Figure 20). Marking of a
partition is not necessary. When the partitions are not marked, the list of events from
all partitions accessible for the user is displayed.
Selection of partitions influences the contents of the list displayed when viewing
event types from 1 to 4 (event type numbers according to the list given below).
List of event types:
1. Zone & tamp.al
2. Other alarms
3. Arm/Disarm/Clr
4. Zone bypasses
5. Access control
6. Failures
7. Functions
8. System
Note:
- Alarms for zones, tamper alarms
- Other alarms. Fire, auxiliary, technical alarms, no sentry
round.
- Arming and disarming, alarm clearing.
- The use of function ”zones bypass ”, bypass cancelling
after disarming.
- Use of keypads and proximity card readers for controlling
electromagnetic door locks, door status monitoring,
temporary bypass of partitions.
- Failures. Technical problems in the system, restarts of
modules.
- Functions. Calls for user functions to control the operation
of the control panel.
- System events. Service mode, clock programming, etc.
The messages about the following event types are not displayed in the
event lists on th LCD keypad:
- Attack alarm (PANIC),
- Silent attack alarm (silent PANIC),
- Forced activity alarm (DURESS type code)
No additional message is displayed when exiting the function.