Download SmartModule 480 Bus Integration Manual v1.7

DIGITAL-LOGIC AG
SM480 Integration manual V1.6
Mass Storage:
FD:
HD:
Floppy disk interface, for max. 2 floppies
2x IDE interface, AT - Type, for max. 4 harddisks
Standard AT Interfaces:
Serial:
Parallel:
Keyboard:
Mouse:
Speaker:
RTC:
Backup current:
Battery:
Device
Name
COM1
COM2
FIFO Std.IRQs
yes
IRQ4
yes
IRQ3
Addr. Signals:
Remarks
3F8
2F8
(Baudrates: 50 – 115 KBaud programmable)
LPT1 printer interface, Modes: SPP (output) , EPP ( bidir.)
AT- or PS/2-keyboard
PS/2
0.1 W output drive
Integrated into the PIIX4 or SuperIO with CMOS-RAM 256byte
<5 µA at 3.0V
Not assembled, must be connected external
Supervisory:
Watchdog:
LTC1232 with power-fail detection, strobe time max. 1 sec.
ISA:
Clock:
PC/104plus
Clock:
USB
DRAM
IEEE-996 standard bus
8 MHz
IEEE-996 standard bus, buffered
33 MHz defined by the design
Defined by the chipsset
66Mhz or 100MHz (Pentium-III), defined by the chipset
BUS:
Power Supply:
Working:
Power Rise Time:
5 Volts ± 5%, 3.3V onboard switch mode regulator
> 100µs (0V --> 4,75V)
Physical Characteristics:
Dimensions:
Length:
Depth:
Height:
85 mm +/- 0.1mm
66 mm +/- 0.1mm
12 mm +/- 0.2mm (with 5mm bus connectors)
+ 12 mm (active or passive cooler)
Weight:
PCB Thickness:
PCB Layer:
90 gr / 9 ounces
1.6 mm / 0.0625 inches nominal
Multilayer
Operating Environment:
Relative Humidity:
Vibration:
Shock:
Temperature:
5 - 90% non condensing
5 to 2000 Hz
10 G
Refer to the product manual
13