Download fifthplay pdf

Transcript
7 Smart DIN rail module
7.2
Configuring the smart DIN rail module
1
Go to the Network tab and choose Groups > All devices.
2
Click Edit in the right-hand column, next to the smart DIN rail module that you want to
configure.
3
Set the General settings in the Manage device dialogue box:
■
Name: Enter the name that you want to give to your smart DIN rail module.
■
Serial number: Entered automatically.
■
Is a producer: Select this check box.
■
Type: Select the type of device: solar panels.
■
Room: Select the room to which the smart DIN rail module belongs.
TIP: Since we are using solar panels here, it is sufficient to provide a name for your home
in this field.
■
Switchable: Ensure that this check box is not selected so that you do not accidentally
switch off the smart DIN rail module.
■
Erase previously collected data: If you select this check box, all previously measured
data will be erased from this smart DIN rail module.
4
Click Save.
5
Click Close to close the dialogue box.
42
fifthplay EnergySmart - User Guide